July 15, 2024
How to Properly Support Ford Escape and Mercury Mariner Hybrid Brakes

Ford Escape and Mercury Mariner Hybrids have regenerative brakes. They will do a self examination each individual 5 minutes that pressurizes the procedure. If you do not disable the self test perform, you can get significantly wounded even though doing brake pad alternative. The next is the move by step course of action for putting the brakes into Safe Brake Support Mode (SBSM):

  1. Place the motor vehicle in park with the ignitionn.
  2. Action on the brake pedal.
  3. With your foot on the brake pedal, turn the crucial OFF then ON 3 instances. Then launch the brake pedal. This must be accomplished in fewer than 3 seconds.
  4. If you have carried out this appropriately, the brake warning lamp will flash as the stored hydraulic force is unveiled. It will continue to be on after the pressure is launched.
  5. You might now safely company the brakes. Soon after the fix you will have to activate the regenerative brakes after extra by turning the ignition critical off then on. Depart the critical in the on position.
  6. When you are performed you will need to have to exit SBSM. To do this, phase on the brake pedal and keep it whilst you transform the ignition off then on. This develops tension in the system. The brake warning light need to now go off.

This is Just 1 of the things that you will need to be informed of when servicing the Ford Escape and Mercury mariner hybrids. Usually refer to the services guide for safety info anytime you are doing the job on or in close proximity to the substantial voltage systems.